Huge Slate Textured Concrete Flagstone Steppingstone Mold, #1818SL-A

MAKE STEPPINGSTONES LIKE THOSE PICTURED FOR AROUND A DOLLAR EACH! --- You are purchasing one of our #1818SL-A - 18x18x1.75 inch thick, natural slate-faced, flagstone, steppingstone molds, to make custom, hand-crafted tile, pavers, veneer, and steppingstones. This mold can be poured from 1/2 inch up to 1.75 inches thick! This mold was taken from a natural block of slate, and has the uneven texture and sides inherent in this beautiful stone as it is found in nature. The photo of the colored stone is an 1818SL-A and is for illustrative purposes only. See our other three molds in this style that range from 1.75 inches thick to 2.75 inches thick. Our complete set of four molds consist of one #1818SL-A, #1818SL-B, 1818SL-C, and 1818SL-D. These stone slabs can be used for steppingstones, patios, driveways, paths, etc. Order the complete set of four (4) different stepping stone molds and get one additional FREE MOLD! See our set #1818SL-4X. - Make many stones from each mold, as they are made with .060 H.I. Industrial ABS material for flexibility, durability and long life. The molds you receive will be "black". Many photos illustrate our molds in white as white tends to photograph better, and we use white plastic periodically. NO KILN or special equipment is necessary. And stone can be made for from twenty-eight to sixty cents per square foot, depending on the thickness desired. - You can make steppingstones like those pictured in the photos for about ten-percent of normal retail prices. And they'll be the colors and designs YOU want! - Most photos of projects in our listings and on our websites were made with our molds by customers who had never worked with concrete or molds before. They used bags of pre-mix concrete to make their stone, some concrete color, which is available in our store, and followed our simple instructions. - Save hundreds to thousands of dollars on your next project. They Did! - It's as easy as making a cake. But no oven is needed! ...Read more

************************************

MAKE THIS STEPPINGSTONE FOR ABOUT .00 and SAVE hundreds to thousands of dollars on your project
HERE'S HOW EASY IT IS TO DO: Lubricate molds with light vegetable oil or mold release if available.
Mix a bag of concrete per the instructions and add color, unless you want gray stone, then pour into molds.
Vibrate lightly to release air then let sit over night undisturbed... pop out steppingstone after about 24 hours!
Complete detailed Instructions are included with purchase, plus email and website support for life!

...Read more

++++++++++++++++++++++++++++++++